ODENZ - supporting New Zealand industries with ODE solenoid and process valves for 30 years

Coffee Equipment

Matching Valves & Pumps – Can we help you? Yes we can!

Need to find an equivalent valve to an existing one on an espresso machine? Give us a call, we can help you choose the right ODE valve to replace Parker, Sirai, Ceme, Lucifer and any other brand used in Espresso [either Café or Domestic] machines and Vending/Automatic machines.

What can we offer?

2 way [2/2] valves for water inlet, hot or cold water, mixing and steam in both G 1/8” & G ¼” ports. 3 way [3/2] valves for Group Head / Brew valve, either In-line with threaded ports or Sub-plate / Flat base / 4 Screw, or with 1/8” or ¼” ports.
Special valves like the LM 90 Degree valve, valves with flow controls, larger orifices and proportional flow.
Espresso machines normally use 8 or 9 Watt valves, while Domestic/Home type machines commonly use the small 5 watt valves.
ODE 8 Watt coils are available in: 240V, 230V, 24V AC & DC with DIN plug connections and there is a 230V coil with the earth tab position reversed [like Parker & Sirai]
Our pumps are either ‘Vibration’ [Solenoid type] with either Polymer or Brass outlets and Rotary Pumps with flows matching Procon and Fluid-o-Tec pumps.; 100, 150, 200 or 300 Litres per Hour.

Port Threads

Most Valves and fittings use BSP [British Standard Pipe] threads. Valves in
coffee equipment generally use either ⅛" or ¼” BSP. A ⅛ “BSP port is actually about 8mm diameter while the ¼” BSP is about 11mm in diameter. 3 Way valves such as Group Head valves tend to have a ⅛”BSP male thread on the ‘3rd way’ or exhaust port on top.